Our Soft Cut Honing Powder provides the absolute best finish achievable from any tooling available anywhere. No swirls, no detectable tooling marks, even in direct natural light. Works on all materials, provided the surface is prepared properly prior to honing. Soft Cut does not make the surface chalky or dull, but will allow the surface to "glow" and have a soft look with minimal sheen. The 400 grit should be used if a higher satin finish is wanted. DO NOT allow to dry on surface, vacuum or clean up while still wet.
- Removes Factory Swirl Marks
- Works On All Stones, Even Hard Quartzites (after diamond honing)
- Leaves No Swirl Marks
- 100% Mechanical Finish
- Uses Very Low (600) RPM