All-Terrain Countertop Installation Cart
Don't settle for cheap imitations, get the original!
The Pro-Cart AT1 provides a solution to the challenges associated
with large and cumbersome countertop installation carts. The cart is
constructed from aluminum tubing, so it is strong and lightweight at
less than 50 pounds. Important for climbing stairs, the cart stays
attached to the countertop when lifted and the 8” casters allow resting
on stair treads. The non-marking, flat-free, closed-cell polyurethane
tires dampen vibrations and enable travel across rough terrain such as
gravel or lawns. The cart’s high ground-clearance allows “popping of
wheelies” over larger curbs, and in many cases one person can operate
the cart by themselves. Tops are secured by clamps located on each side
of the cutout to reduce breakage in the middle. The wheelbase is wide
enough to make the cart very stable, but still fits on truck ramps and
enables maneuvering through very tight spaces.
New for the 2014 model are updated
casters (with 8", non-marking, flat-free, closed-cell polyurethane
tires), a heavy-duty bolt together design, an increased opening on the
clamps (opens to 2.88 in.), and an improved Folding Kit accessory.
Accessories: The Folding Kit (part #
PCAT1-FK-14) enables the cart to be folded for easy storage (reduces
cart width to less than 10 inches wide). The Multi-top Accessory
uprights (part # PCAT1-MTA) can be quickly clamped into the Pro-Cart AT1
to enable transport of multiple smaller tops at the same time, and the
Tool Tray Accessory (part # PCAT-TT) enables transportation of heavy
tool bags/cases to the install location without interfering with the
cart’s ability to carry countertops.
Max Clamp Opening: 73 mm (2.88 in.)
Weight Capacity: 750 lb