The Pro-Anchor™ T-31 Anchor Machine is used to easily and precisely
cut curved T-slots in the back side of stone pieces for the attachment
of anchor bolts used in bottom-mount sink or architectural facing
systems. The machine features a split-clamp design for optimum grinder
stability (unlike weak set-screw holders on other anchor machines). The
machine is available with or without a vacuum-powered base. Two separate
vacuum zones on the base can be turned on or off, enabling the machine
to be used near cut outs or edges (i.e. the entire vacuum base does not
have to be in contact with the surface). The vacuum base seal is cut as
one piece of neoprene foam; this “seamless” design provides a superior
leak-free seal with the stone to guarantee minimal air consumption. The
machine also features industrial quick-couplers for both air and water,
and the efficiently designed venturi vacuum generator creates high
vacuum pressure with very low air consumption (only 0.5 SCFM). The
machine cuts in both push and pull direction, and the water hose with
ball valve and quick-coupler can be easily detached to spray the work
area. The grinder accepts any T-31 anchor bit with ¼” shank. One-year
manufacturer’s limited warranty (grinders are covered under their
respective manufacturer’s warranties).
Electric Model: A powerful and reliable electric Makita grinder
with GFCI outlet adapter and a carrying/storage case are included.
Model: The pneumatic grinder only requires 3 SCFM, and the extended
shaft is supported by five bearings for long life and also provides the
ideal leverage to reduce strain while cutting.
Currently available in US and Canada only.